News

May 18, 2024

Wall paneling DIY

This Shaker wall paneling DIY will give your rooms a professional-looking treatment – without the cost. Get the best home decor ideas, DIY advice and project inspiration straight to your inbox! Thank

This Shaker wall paneling DIY will give your rooms a professional-looking treatment – without the cost.

Get the best home decor ideas, DIY advice and project inspiration straight to your inbox!

Thank you for signing up to Realhomes. You will receive a verification email shortly.

There was a problem. Please refresh the page and try again.

Shaker wall paneling is one of the most popular DIY upgrades homeowners are making today. While the most classic wood panel look is made up of evenly spaced vertical posts bordered by a horizontal trim at the top, there are lots of ways to get creative with this wall paneling DIY too. You can go geometric, with a grid-style layout, or a crafty herringbone look, but today we're doing a basic (but nonetheless stylish) square wall paneling DIY.

To ensure a really neat and professional looking finish, you want to measure twice and cut once for this kind of DIY job. So, measure up your wall space, accounting for any wall fixtures like radiators, baseboards and so on.

The key to a professional finish is to have the trim the same distance away from the edge of the wall so the overall look is uniform. All panels should also all be at the same height, and the same distance from floor and ceiling. Mark up the wall with your pencil so you know exactly where the trim will go.

You can alter the width of these pieces but we chose to cut our trim to 100mm in width for a bold, modern look.

If you want to panel over textured walls, pick up some backer board to put down first. This isn't part of our video so ensure you cut it to the correct dimensions and attach it to the wall securely ready for your wooden panels.

Start by adding glue to your wooden panel, securing it at the top border and working your way around the sides and the bottom. Use a level to make sure everything is super precise and use actual nails also if you'd like an expert finish.

You then want to secure your vertical trim, then the horizontal panels, cutting them to the right length to fit the space.

Using the caulk/wood filler, make sure you fill in any gaps where the trim edges meet. Perfection is tricky after all! Repeat until everything is securely in place and looking very neat. Be sure to sand any uneven areas if you need to.

Whether you've used a backer board or not, prime the entire area to prepare it for a coat of paint.

And finally, when the primer is dry, paint your DIY Shaker wall paneling in the color of your choice!